KME Smisol Clim Platinum Copper Air Conditioning Pipe, 50m, Various Diameters

Technical Features

Model

KME Smisol Clim Platinum Copper Air Conditioning Pipe , 50m, Various Diameters

Fields of application

• Conditioning.
• Transport of refrigerant gases (R32, R410A, R407, …).

Diameters

• 1/4 x 0.8
• 3/8 x 0.8
• 1/2 x 0.8
• 1/4 x 1.00
• 3/8 x 1.00
• 1/2 x 1.00

Coating features

• Thermal conductivity: λ ≤0.038 W/m°K at 40°C.
• Average value of the water vapour diffusion resistance factor “µ” greater than 15000. (EN 13469)
• Average coating density: 33 kg/m ³ .
• Free from ammonia residues.
• Excellent resistance to external chemical agents.
• Non-flammable class BL-s1-d0 according to EN 13501-1.
• Free from CFCs and HCFCs (Reg. EEC/EU 2037/2000)
• Pigmentation of the outer film “Silver grey”.
• Greater resistance to UV rays.
• Halogen-free flame retardant.

Size Table

General Features

It is the copper pipe produced according to the EN 12735-1 standard and is pre-insulated in closed-cell expanded polyethylene of regular and uniformly distributed dimensions (UNI EN ISO 15758).

It is distributed in rolls.

The diameter of the copper pipe, as required by the EN 12735-1 standard, is expressed in inches.

The insulating sheath is produced in full compliance with European Regulation EEC/EU 2037/2000, which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment.

The thickness of the sheath is also sized to meet the multiple needs of this application sector.

Given the specific nature of the field of use, special attention is paid to the external protective polyethylene film aimed at preventing the formation of condensation on the external wall of the product.

SMISOL® Clim Platinum is also characterised by particularly low eccentricity values, a very important feature for the flaring operation.

Internal surface

The internal surface of the copper tube is shiny, clean, and dry—essential characteristics of a product commonly found on the market for industrial use. This unique feature allows for an integrated system with the terminal components of the system. The exceptional internal cleanliness of SMISOL® Clim Platinum is ensured by sealing the ends of each roll with caps, directly during production.

External protection

Closed cell expanded polyethylene coating with average value of water vapor diffusion resistance factor “µ” greater than 15000 .

The insulating sheath is produced in full compliance with European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment, and has a fire behaviour of class BL-s1-d0 according to EN 13501-1.

The outer polyethylene film contains a darker pigment than traditional white to counteract the crystallization process of PE. Furthermore, standard UV additives counteract the flame retardant properties required for the product.

To avoid this inconvenience, the SMISOL® Clim Platinum sheath contains an environmentally friendly halogen-free flame retardant that does not counteract the anti-UV action.

Tests conducted according to ASTM G-155 (accelerated aging) demonstrate that SMISOL® Clim Platinum is suitable for areas with strong annual solar radiation . At the end of the exposure test, the sample showed no signs of degradation.

Product benefits

• Non-flammable coating
  Fire resistance class BL-s1-d0

• Resistant to solar radiation
  Suitable for areas with strong annual solar radiation. At the end of the exposure test, no visible signs of degradation were observed.

• Highly vapor-tight coating
  Closed-cell expanded polyethylene coating with an average water vapour diffusion resistance factor of µ > 15000 .
  The sheath is produced in compliance with European Regulation EEC/EU 2037/2000 .

• Clean and dry internal copper
  The inner surface of the copper tube is shiny, clean and dry , ideal for industrial use.

• Reduced eccentricity
  Particularly low eccentricity values, a fundamental characteristic for a precise joint.

• Perfect fit between tube and sheath
  The production process guarantees total adhesion of the insulating sheath to the copper pipe, avoiding gaps that would compromise the efficiency of the thermal insulation .