Fondital Gazelle Evo 5000 Methane Convection Stove Gas Radiator, 4.52 kW - Code GEIT501PR2

Technical Features

Model

• Color: White
• LPG Code: GEIT561PR2
  
• Methane Code: GEIT501PR2

Energy Efficiency

• Seasonal space heating energy efficiency class: A
• Seasonal space heating energy efficiency (ηs): 88%

Performance

• Nominal heat input (Pnom): 4.5 kW
• Minimum heat input (Pmin): 2.8 kW
• Useful efficiency at nominal thermal power (ηth,nom): 92.2%
• Useful efficiency at minimum thermal power (ηth,min): 94.9%
• Rated thermal power: 4900 W
• Reduced thermal output: 3000 W
• Rated thermal power: 4520 W
• Reduced thermal power: 2850 W
• Efficiency at nominal heat output (methane): 92.2
• Efficiency at nominal heat input (propane): 92.3
• Efficiency at reduced heat input (methane): 94.9
• Efficiency at reduced heat input (propane): 95.1
• NOx emission class: 5
• Combustion chamber: Forced draft

Electrical Data

• Power supply voltage/frequency: 230 – 50 V/Hz
• Electrical protection class: 20 IP

Connection Diameter

• Gas connection diameter: G 1/2 M inches
• External diameter of straight exhaust pipes (C13): 2 x 55/2* mm
• External diameter of split pipes (C53): 35 or 60 mm

* 2 x 55/2 refers to 2 pipes (one for air intake and one for fume exhaust) each with the same shape as a semicircle with a diameter of 55 mm.

Dimensions

• WxHxD: 667x550x195 mm
• Gross weight: 24 kg

General Features

The Power of Evolution

GAZELLE EVO is a sealed chamber, forced draught, premixing gas convection stove.

Gas convection heaters, such as the Gazelle Evo , are an excellent solution in terms of efficiency and safety for heating domestic and industrial environments but, like any other product, they must be used and maintained with care and precision.

Main features:

• Seasonal energy efficiency class A
  
• High efficiency die-cast aluminum heat exchanger with heat recovery unit
  
• Separate and extendable suction and exhaust pipes.
  
• User interface with encoder, four buttons and large backlit LCD
  
• Total premix burner with electronic ignition and ionization flame control.
  
• Fans (combustion centrifugal and convection tangential) with high-efficiency brushless motors
  
• Electronic safety regulation and management equipment with microprocessor
  
• Maximum power consumption ≤ 30W
  
• Possibility to connect the optional remote control
  
• Optional additional room probe
  
• Safety air pressure switch.
  
• Safety thermostat (2 on 5000 and 7000 models) S
  
• Gas valve with constant air/gas ratio.
  
• Room temperature selector with antifreeze function.
  
• Built-in humidifier.
  
• Weekly operation programming.
  
• Available in models: 3000 - 5000 - 7000

A single gas convection stove with a thermal output of less than 5 kW is not considered a heating system, therefore one might think that there are no legislative obligations to carry out periodic annual maintenance.

In reality, even when the gas convection heater is not considered a heating system, only the obligation to carry out energy efficiency checks no longer applies, but all the requirements reported in the supplier's instruction manual remain valid, which has always prescribed annual maintenance by qualified personnel.

Maintenance allows the machine to operate at peak efficiency and safety, thus saving fuel, improving environmental health, and extending the machine's life. Regular maintenance should also include extraordinary maintenance in the event of device breakage or wear.

In accordance with Ministerial Decree no. 37 of 22 January 2008, installation and maintenance of appliances must be carried out only by expert professionals who are required to issue a declaration of conformity for the product itself.

Professionally qualified personnel means those with specific technical expertise in the field of residential heating system components, or qualified in accordance with current legislation.

To ensure maximum efficiency and safety of the appliance, it is recommended that the inspection certificate be completed by an authorized Technical Assistance Center (TAC). Regarding installation, it is important to consider some guidelines:

• The appliance must be installed on walls directly communicating with the outside, alternatively alternative installations must be arranged always in compliance with current regulations.

• The correct distance from other surrounding elements must be respected as shown below: