SKU: 50114665

Orbis Onda LPG Flush-Mounted Gas Detector with 230V Catalytic Sensor

Price
159,00 €

+ Spese di spedizione: 40,00€
Extension of Technical Service
Extend your technical service for an additional 3 years after the standard 24-month warranty expires. | Info
In stock and ready for shipping
Orbis Onda LPG Flush-Mounted Gas Detector with 230V Catalytic Sensor

Orbis Onda LPG Flush-Mounted Gas Detector with 230V Catalytic Sensor

Price
159,00 €

+ Spese di spedizione: 40,00€

TECHNICAL DATA SHEET

Product information

Built-in LPG detector, with catalytic sensor and relay output.

Visual and acoustic signalling of any gas leaks

The output relay can be connected to a normally open 'NO' or normally closed 'NC' solenoid valve and can interrupt the gas flow once a leak is detected.

On the front there are three indicator LEDs, the green one indicates that the power is on, the yellow one indicates that the gas sensor is faulty, and the red LED indicates that the gas concentration measured in the air is higher than the alarm threshold.

The detector automatically signals the sensor's expiration date

Reset/test button for alarm silencing

The package includes two interchangeable white and anthracite colored front panels.


Technical Features

  • Model

    Orbis Onda LPG Flush-Mounted Gas Detector with 230V Catalytic Sensor

General Features

  • ORBIS



    Built-in LPG detector, with catalytic sensor and relay output.
    * Visual and acoustic signalling of any gas leaks
    * The output relay can be connected to a normally open 'NO' or normally closed 'NC' solenoid valve and can interrupt the gas flow once a leak is detected.
    * On the front there are three indicator LEDs, the green one indicates that the power is on, the yellow one indicates that the gas sensor is faulty, and the red LED indicates that the gas concentration measured in the air is higher than the alarm threshold.
    * The detector automatically signals the sensor's expiration date
    * Reset/test button for alarm silencing
    * Two interchangeable white and anthracite front panels are included in the package
    * Adaptable to the main civil series

    TECHNICAL CHARACTERISTICS

    Power supply: 230 V
    * Rated frequency: 50 / 60 Hz
    * Contact rating: 5 A / 250 V AC
    * Contact type: In exchange
    * Current consumption: 20 mA max
    * Operating temperature: -10 °C to +40 °C
    * Relative humidity: 30% – 90% RH
    * Acoustic signal: 85 dB(A) at 1 m.
    * Degree of protection: IP 40
    * Installation: Wall or on 3-module box (type 503)
    * Compatible plates (*): ABB (Chiara series); BTICINO (Axolute, Living, International, Light, Light Tech, Magic, Matix series); VIMAR (Idea, Plana, Eikon series); LEGRAND (Vela Quadra, Vela Tonda, Cross series); GEWISS (Chorus, Playbus series); SIEMENS (Delta Futura, Delta Geo series)
    * Electronic self-diagnosis with sensor fault indicator
    * Intervention threshold at a concentration of 8% of the LEL (Lower Explosive Limit) of the gas
    * Intentional preheating delay after the appliance is connected to the mains, approximately 1 minute
    * Intentional delay of acoustic alarm and relay control approximately 15 seconds
    * Catalytic sensor life: 5 years from the date the detector is powered on