Share Post E-mail Copy link
Circolatore Dab VS 8/150 M Rotore Bagnato Ricircolo Acqua Sanitaria
Circolatore Dab VS 8/150 M Rotore Bagnato Ricircolo Acqua Sanitaria
Click to open expanded view
SKU: VS8/150M

Dab VS 8/150 M Wet Rotor Circulator for Domestic Water Recirculation

Price
189,00 €

+ Spese di spedizione: 40,00€
Extension of Technical Service
Extend your technical service for an additional 3 years after the standard 24-month warranty expires. | Info
In stock and ready for shipping
Circolatore Dab VS 8/150 M Rotore Bagnato Ricircolo Acqua Sanitaria

Dab VS 8/150 M Wet Rotor Circulator for Domestic Water Recirculation

189,00 €

+ Spese di spedizione: 40,00€

TECHNICAL DATA SHEET

Product information

Operating range: from 0.6 to 3.7 m3/h with a head of up to 6 meters. Liquid temperature range: from -10°C to +85°C for sanitary applications and +110°C for other applications. To avoid limescale build-up, it is advisable not to exceed 65°C and to install an anti-limescale system when the water hardness exceeds 15 French degrees. Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water (max. 30% glycol). Maximum operating pressure: 10 bar (1000 kPa). Minimum head pressure: the values ​​are shown in the relevant tables. Installation: with HORIZONTAL MOTOR AXIS.


Technical Features

  • Model

    Dab VS 8/150 M Wet Rotor Circulator for Domestic Water Recirculation

  • Energy Efficiency

    Operating range: from 0.6 to 3.7 m3/h with head up to 6 metres.
    Liquid temperature range: -10°C to +85°C for applications
    sanitary ware and +110°C for other uses.
    To avoid the phenomenon of limescale it is advisable not to exceed 65°C and
    provide an anti-limescale system when the water hardness level is too high
    exceeds 15 French degrees.
    Pumped liquid: clean, free from solid substances and mineral oils, not
    viscous, chemically neutral, close to the characteristics of water
    (glycol max 30%).
    Maximum working pressure: 10 bar (1000 kPa).
    Minimum head pressure: the values ​​are shown in the relevant tables.
    Installation: with HORIZONTAL DRIVE AXLE.
    Special versions on request: other voltages and/or frequencies.
    Accessories: 1/2”F - 3/4”F - 1”F union fittings
    Copper pipe union fittings for soldering: Ø 22 mm
    Ø 28 mm

General Features

  • VS



    Circulation pump for closed, pressurized, or open-vessel domestic hot water systems. Also suitable for solar energy systems.
    Wet rotor circulators are based on sealed rotor technology and are characterized by the absence of a packing or mechanical seal. The pumped liquid cools and lubricates the motor and rotating parts.

    Bronze pump body.
    Die-cast aluminum motor case.
    Technopolymer impeller.
    Ceramic crankshaft mounted on graphite bushings lubricated by the same pumped liquid.
    Rotor jacket, stator jacket and closing flange made of stainless steel.
    Ceramic thrust ring, ethylene-propylene sealing rings.
    The two- or four-pole, asynchronous, wet-rotor motor is resistance-protected and does not require any overload protection.

    General features of the series:


    Operating range: from 0.5 to 3.6 m3/h with heads up to 6 metres.
    Liquid temperature range:
    from -10°C to +85°C (for sanitary uses)
    +110°C (for other uses).
    Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water (glycol max 30%).
    Maximum working pressure: 10 bar (1000 kPA).
    Degree of protection: IP 44.
    Insulation class: F.
    Cable gland: PG 11.
    Installation: with the motor axis horizontal.