Dab Nova 600 MA Submersible Electric Pump for Draining Clear Water for Domestic Use

Technical Features

• Model

  DAB Nova 600 M Submersible Electric Pump for Draining Clear Water for Domestic Use

• Characteristics

  • Operating range: from 1 to 16 m3/h with heads up to 10.2 metres.
  • Liquid temperature range: 0°C to +35°C for domestic use.
  • Pumped liquid: cloudy water without fibers
  • Grain size passing through the suction grid:
    
    • NOVA 180/NOVA 200: 5 mm.
    • NOVA 300/NOVA 600: 10 mm.
  • Minimum draft depth:
    
    • NOVA 180 A: 77 mm
    • NOVA 180 NA/NOVA 200: 8 mm
    • NOVA 300: 85 mm
    • NOVA 600 A: 175 mm
    • NOVA 600 NA: 38 mm
  • Maximum immersion: 7 meters.
  • Maximum dry running time: 1 minute.
  • Degree of protection: IP 68.
  • Insulation class: F

• Dimensions

  

  MODEL	TO	B	C	D	AND	H	H1	H2	MIN. LIV.	MAX LIV.	DNM GAS	PACKAGING DIMENSIONS			CABLE	VOLUME (mc)	WEIGHT Kg
  												THERE	L/B	H
  NOVA 600 MA	193	235	56	296	90	334	443	73	190	390	1¼”	287	202	431	5 m.	0.025	7
  NOVA 600 (MT)-NA	162	160	56	–	90	334	–	73	–	–	1¼”	287	202	431	10 m.	0.025	6.7
  NOVA 600 MA - SV*	193	235	56	296	90	334	443	73	190	390	1¼”	287	202	431	5 m.	0.025	7
  NOVA 600 (MT)-NA SV*	162	160	56	–	90	334	–	73	–	–	1¼”	287	202	431	10 m.	0.025	6.7

• For more information click here

General Features

• APPLICATIONS

  The NOVA series submersible pump is suitable for domestic use in fixed, automatic applications, for draining basements and garages subject to flooding.

  Thanks to its compact and easy-to-handle shape, it is also ideal as a portable pump for emergencies, such as drawing water from reservoirs or rivers, emptying swimming pools and fountains, or draining excavations and underpasses. It is also suitable for gardening and general hobby use. The level switch allows for permanent installation, ensuring automatic operation. A version with a special stainless steel (SV) pump shaft is also available.

  CONSTRUCTION FEATURES OF THE PUMP

  Pump body, impeller, cap and suction grille in water-resistant technopolymer.
  Motor, rotor shaft and screws in stainless steel.
  Triple seal with interposed rings and oil pre-chamber.

  ENGINE CONSTRUCTION FEATURES

  Continuous-duty asynchronous submersible type.
  Stator inserted in an airtight stainless steel casing and covered by a cap which encloses the wiring, microswitch and capacitor.
  Rotor mounted on oversized, greased-for-life ball bearings to ensure silence and durability.
  Built-in thermal-amperometric protection and permanently inserted capacitor in the single-phase version.
  To protect the three-phase motor, it is recommended to use a remote motor protection device in accordance with the standards.