Share Post E-mail Copy link
KME Smisol One Expanded Polyethylene Coated Copper Pipe, 25m, Diameter 22x1
KME Smisol One Expanded Polyethylene Coated Copper Pipe, 25m, Diameter 22x1
Click to open expanded view
SKU: 99352820

KME Smisol One Expanded Polyethylene Coated Copper Pipe, 25m, Diameter 22x1

Price
350,00 €

+ Spese di spedizione: 40,00€
Extension of Technical Service
Extend your technical service for an additional 3 years after the standard 24-month warranty expires. | Info
In stock and ready for shipping
KME Smisol One Expanded Polyethylene Coated Copper Pipe, 25m, Diameter 22x1

KME Smisol One Expanded Polyethylene Coated Copper Pipe, 25m, Diameter 22x1

350,00 €

+ Spese di spedizione: 40,00€

TECHNICAL DATA SHEET

Product information

SMISOL® One, versatile and professional.

Fields of application:

• Hot and cold drinking water.

• Heating.

Technical Features

Model

KME Smisol One Expanded Polyethylene Coated Copper Pipe , 25m, Diameter 22x1

Fields of application

  • Hot and cold drinking water.
  • Heating.

Coating features

  • Thermal conductivity: λ ≤0.038 W/m°K at 40°C.
  • Average coating density: 33 kg/m3
  • Minimum coating thickness: 6 mm (9 mm for diameter 22 x 1 mm) continuously monitored with laser gauge.
  • Free from ammonia residues.
  • Excellent resistance to external chemical agents
  • Non-flammable class BL-s1-d0 according to EN 13501-1
  • Free from CFCs and HCFCs (Reg. EEC/EU 2037/2000).

Size Table

General Features

SMISOL® Clim was born from close collaboration between manufacturer and customer, to meet the needs of a market increasingly attentive to technological solutions capable of fully satisfying the technical requirements of the air conditioning sector, maintaining an excellent quality/price ratio.

This copper tube is manufactured according to the EN 1057 standard, pre-insulated during production with expanded polyethylene with a closed-cell structure of regular and uniformly distributed dimensions. The insulating sheath is also protected externally by a special polyethylene film. Insulated according to Law 10/91 and its implementing decree (DPR412/93), for the distribution of the heat transfer fluid inside heated environments. The insulating sheath is produced in full compliance with European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment.

Internal Protection

It presents proven bacteriostatic properties , which make it the ideal material for water and sanitation networks, in order to prevent bacterial proliferation such as Legionellosis. SMISOL® One complies with Ministerial Decree 174/04 (GU 166 of 17/07/04) which defines the conditions to which materials in contact with drinking water must respond.
It is subjected, during the production phase, to a Patented passivation and stabilization treatment of the internal wall makes it absolutely reliable in compliance with the potability parameters set by European legislation on transported drinking water (European Directive 2020/2184/EU). It has a carbon residue C <0.06 mg/dm2, much lower than that required by the EN 1057 standard, which establishes a carbon content C ≤0.20 mg/dm2.

External protection

The insulating sheath is made of closed-cell expanded PE compliant with EEC/EU Regulation 2037/2000 (free of CFCs and HCFCs) with a green polyethylene outer film and a corrugated surface. The coating has a fire rating of class BL-s1-d0 according to EN 13501-1.

Product benefits

  • Non-flammable coating
    Fire resistance class BL-s1-d0 .

  • Expanded polyethylene coating
    Closed cell structure with average value of the water vapour diffusion resistance factor µ > 15000 .
    Produced in compliance with European Regulation EEC/EU 2037/2000 .

  • Inner surface of the copper tube
    It appears shiny, clean and dry , essential qualities for industrial use.

  • Reduced eccentricity
    Very low eccentricity values, ideal for ensuring perfect joints .

  • Perfect adhesion between sheath and tube
    The production process guarantees total adhesion of the insulating sheath to the external wall of the copper pipe, avoiding the formation of cavities that would reduce the efficiency of the thermal insulation .