Presscontrol Mondialpress Watertech pressure switch 1.5 BAR

Technical Features

Model

Presscontrol Mondialpress Watertech pressure switch 1.5 BAR



Power supply voltage 230 Vac
Voltage variations +/- 10%
Frequency 50-60 Hz
Current 8 A
Power 1.1 kW (1.5 HP) at 230V
Protection index IP 65
Operating pressure 10 bar
Operating temperature 60°C
Minimum flow ~1 l/min
1” Gc male connections

General Features

WATERTECH 1.5

ELECTRONIC DEVICE FOR PUMP CONTROL AND PROTECTION
Starts and stops the pump depending on the opening or closing of the utilities.
Stops the pump in case of lack of water and protects it from dry running.
It can be mounted on surface pumps and submersible pumps.
It does not require an expansion vessel, check valve, filter or fittings.
It requires no maintenance.
INSTALLATION AND START-UP
The device can be mounted directly on the pump or between it and the first use.
Make the electrical connections, check that the pump is correctly primed, open a tap and apply power.
The green Power On LED lights up on the panel, the pump starts (the yellow Pump On LED lights up) and runs for a few seconds to build up pressure in the system. If this time is insufficient, the device stops the pump.
Press and hold the Restart button; water flows from the open faucet. When the faucet is closed, the pump stops after a few seconds (the yellow Pump On LED is off).
From now on the device starts and stops the pump depending on the opening and closing of the use.
In case of water shortage, the device stops the pump and protects it from dry running.
In the event of a power failure, the appliance automatically resets when the power returns.