Italtecnica Brio 2.0 Pressure Switch for Electric Pumps

Technical Features

Model

Italtecnica Brio 2.0 Pressure Switch for Electric Pumps

Energy Efficiency

Presscontrol power supply: Single-phase 230V
Restart Calibration: Adjustable from 1 to 3.5 bar
Maximum pump power: 2.00hp
Autoreset: Yes
Maximum current consumption: 10 (6) A 230V
Protection: IP65
Maximum supported flow rate: 150 L/min
Minimum supported flow rate: 2.5 L/min
Maximum Water Temperature: 65° C
Measurements: 96mm x 105mm x 190 – 1''

Performance

Italtecnica Brio 2.0 automatically turns the electric pump on and off. The BRIO 2.0 presscontrol is this year's new product from the Italian company ITALTECNICA. Its function is to start the pump at the slightest water demand and protect it from dry running. The presscontrol is supplied with a cable and plug.
This press control can be installed in any position, vertical or horizontal, and the minimum flow for continuous operation of the pump is now reduced to 2.5 l/min. The redesigned internal water passage allows a pressure drop of only 0.45 bar at 100 l/min.
The integrated non-return valve is now inspectable, the device now has an integrated pressure gauge and comes with the Smart Autoreset function and anti-blocking protection as standard.
It also protects against dry running, and the Smart Autoreset function consists of making restart attempts at longer intervals after a block due to lack of water, for a total of 10 attempts.
The anti-blocking protection ensures that every 24 hours of non-use, it turns the pump on for 10 seconds to prevent the rotor from blocking.

General Features

Italtecnica Brio 2.0




• Automatically controls the starting and stopping of single-phase electric pumps (surface, vertical and submersible).
• It completely replaces the traditional system consisting of a pressure switch and expansion vessel.
• Starts the electric pump following a decrease in pressure (opening taps) and stops it when the flow of liquid at maximum pressure of the electric pump is interrupted (closing taps).
• Protects against dry running.
• Integrated and inspectable non-return valve
• Integrated smart auto-reset. After a water shortage, it attempts to restart at longer intervals for a total of 10 attempts.
• Anti-jam protection as standard. Every 24 hours of non-use, it runs the pump for 10 seconds to prevent the rotor from jamming.
• Adjustable intervention pressure.
• Installation in any position – vertical or horizontal.
• Easy to replace electronic board.
• Zero maintenance.
• Installation in bypass mode.
• Minimum flow for continuous pump operation reduced to 2.5 lt/min.
• Redesigned internal water passage duct allows a pressure drop of only 0.45 bar at 100 lt/min

OPTIONAL

• Version equipped with electrical connection cables for line and motor.
• Hydraulic connections with 1"F swivel fitting with union.
• Special plastic fittings for quick installation.
• Plastic T-fitting.