ECOCOMFORT PLUS 160 High Efficiency Heat Recovery Unit with Control (MASTER)

Technical Features

Model: ECOCOMFORT PLUS 160 (Code AP19993)

• Tube diameter: 160 mm
• Maximum room surface area: 35 m²
• Power supply voltage: 110V ÷ 230V~ – 50/60Hz

Operating speed

• Low → 28 m³/h – 2.8 W – 26 dB(A)
• Average → 33 m³/h – 5.2 W – 30 dB(A)
• High → 50 m³/h – 8.9 W – 36 dB(A)
• Sleep → 15 m³/h – 1.6 W – nd

General characteristics

• Available models: AP19993 (Ø 160 mm) and AP19989 (Ø 100 mm)
• AP19993 and AP19989 packaging:
  • Ventilation unit with heat recovery unit
  • Telescopic tube and external grille
  • Infrared remote control

Ventilation unit

• Axial extractor/fan with brushless DC motor
• Shockproof PVC telescopic tube
• Regenerative ceramic exchanger with efficiency up to 90%
• Reticulated polyurethane filter , ISO Coarse filtration class (EN799)
• Flow straightener for superior performance (Ø 160 mm version only – AP19993)
• Lower front indicator LED
• Integrated sensors: temperature, VOC air quality, humidity and twilight
• Degree of protection: IPX4

Infrared remote control

• Simple and functional 12-key keyboard
• Infrared technology for rapid communication
• Visual feedback via LED indicator (bottom front)
• Compatible with all ECOCOMFORT PLUS devices
• Degree of protection: IP40
• Battery life: > 24 months
• Power supply: 2 AAA batteries (not included)

Dimensions

General Features

ECOCOMFORT PLUS 160

ECOCOMFORT PLUS is a ventilation system that allows for constant exchange of clean air in indoor environments, without the need to open windows, also preventing the formation of humidity and mold.

A highly efficient regenerative ceramic heat exchanger, located inside the unit, accumulates the heat released by the flow of air extracted from the room and returns it by heating the air during the supply cycle, thus recovering the outgoing heat and avoiding energy waste.

ECOCOMFORT PLUS is available in two diameters (100 mm and 160 mm) and must be installed on perimeter walls.

No further configuration is required.

ECOCOMFORT PLUS is equipped with an ISO COARSE efficiency class filter that retains any impurities from the air introduced into the room and a low-consumption brushless DC motor controlled by a microprocessor that processes information from the sensors on the unit: temperature, VOC (Volatile Organic Compounds), humidity and brightness.

All these sensors allow the unit to automatically adopt the most suitable ventilation modes and ensure the best environmental comfort.

The remote control allows for simple and intuitive setup during installation and easy use by the end user.

Infrared (IR) technology allows immediate communication with the device and the user can easily manage the sensors the unit is equipped with and obtain information regarding the current operating mode.

INSTALLATION
The ECOCOMFORT PLUS ventilation unit must be installed on the perimeter walls, from a minimum of 24 cm.

Thanks to the telescopic tube, it is easily adaptable to all wall thicknesses, furthermore, installation is extremely quick and easy thanks also to the foldable external grille that can also be mounted from inside the room.